Configuring The Administrator Settings; Administrator Tab; Rest Settings Tab - Ricoh SP 221S User Manual

Configuring the Administrator Settings

Click [Administrator Tools] to display the page for configuring the administrator settings.
This page contains the following tabs: [Administrator], [Reset Settings], [Backup Setting], [Restore
Setting], [Set Date/Time], and [Energy Saver Mode].

Administrator Tab

Administrator Settings
Item
Change Password
(only SP 221SF, SP
277SFNwX, and SP
221SFNw)
New Password
Confirm New Password Enter the same password again, to confirm.
Change E-mail Address
(only SP 221SF, SP
277SFNwX, and SP
221SFNw)
Administrator E-mail
Address
(only SP 221SF, SP
277SFNwX, and SP
221SFNw)

Rest Settings Tab

Reset Settings
Item
Reset Network Settings
Check this to configure the administrator password.
Enter the new administrator password. Can contain up to 16 characters.
Check this to configure the administrator e-mail address.
Enter the administrator e-mail address.
If the machine's e-mail address is not configured in the [SMTP] page, this
address will be used as the sender's address of e-mails sent from this
machine, such as notification e-mails. Can contain up to 64 characters.
Select to restore the following settings to their defaults:
• Settings under [Network Settings]
• Settings under the [Administrator] tab of [Administrator Tools]
Configuring the Administrator Settings
Description
Description
229