7. Configuring the Machine Using the Control Panel
System Settings
Adjust Sound Volume
Specifies the volume of the sounds produced by the machine.
Item
Panel Key
Sound
On Hook
Mode
Job End Tone
Job Error Tone
Alarm Volume
180
Description
Specifies the volume of the beep that
sounds when a key is pressed.
Specifies the volume of the sound from
the speaker during on hook mode.
Specifies the volume of the beep that
sounds when a job is complete.
Specifies the volume of the beep that
sounds when a fax transmission error
occurs.
Specifies the volume of the alarm that
sounds when an operation error
occurs.
Value
• Off
• Low
• Middle
• High
Default: [Low]
• Off
• Low
• Middle
• High
Default: [Middle]
• Off
• Low
• Middle
• High
Default: [Middle]
• Off
• Low
• Middle
• High
Default: [Middle]
• Off
• Low
• Middle
• High
Default: [Middle]