Fax Mode Screen - Ricoh SP 221S User Manual

6. Sending and Receiving a Fax

Fax Mode Screen

This section provides information about the screen in fax mode.
By default, the display shows the copier screen when the machine is turned on.
If the copy or scanner screen is shown on the display, press the [Facsimile] key on the control panel to
switch to the fax screen.
Screen in standby mode
RX File
1. Current status or messages
Displays the current status or messages.
2. Current settings
Displays the current resolution and density settings.
3. Selection key items
Displays the functions you can use by pressing the corresponding selection keys.
4. Current date and time
Shows the current date and time.
• The machine's default mode at power on can be specified in the [Function Priority] setting under
[Admin. Tools]. For [Function Priority], see page 187 "Administrator Settings".
• The display format for time and date can be specified in [Set Date/Time] under [Admin. Tools]. For
setting the date and time, see page 129 "Setting the Date and Time".
128
DSH154
DSH233