Ricoh SP 221S User Manual page 252

10. Troubleshooting
Message
Fax Job Memory
Overflow
Indep.Sply.Prt.Cart.
Internal Misfeed
Memory Overflow
Memory Overflow
Memory Overflow
TX
Cancel
Misfeed: BypassTray
Misfeed: Stnd. Tray
Misfeed: Tray 1
250
Causes
The number of fax jobs in
memory (unsent or unprinted
faxes) has reached maximum,
so new jobs cannot be stored.
A non-supported print cartridge
is installed.
Paper has been jammed in the
machine.
The data is too large or
complex to print.
• The machine's memory
reached capacity while
scanning the first page of
the original to store a fax
job in memory before
transmission.
• The machine's memory
reached capacity while
storing a fax in memory in
Memory Transmission
mode.
Memory has reached capacity
while scanning the second or
later pages of the original when
trying to send a fax in Memory
Transmission mode.
Paper has been jammed in the
bypass tray.
Paper has been jammed in the
paper exit area.
Paper has been jammed in the
tray 1 paper input area.
Solutions
Wait until pending jobs have been
transmitted or printed.
Remove and replace it with a print
cartridge specified by an authorized
dealer.
Remove the jammed paper. See
page 256 "Clearing Misfeeds".
If using the printer driver, set [Resolution] in
the [Print Quality] tab to [600 × 600 dpi].
Resend the fax in parts as several smaller
individual faxes, or send at a lower
resolution.
Press [TX] to send only the pages that have
been scanned in memory, or press
[Cancel] to cancel.
Remove the jammed paper. See
page 256 "Clearing Misfeeds".
Remove the jammed paper. See
page 256 "Clearing Misfeeds".
Remove the jammed paper. See
page 256 "Clearing Misfeeds".