Description Of Pc Commands - Denon DN-V310 Instructions Manual

3

Description of PC Commands

Detailed Description of Commands
Ⅰ. External Control Commands: PC group
Detailed description of the external control commands in the PC group
1. Remote control command (RC) ---- Valid in the same way as IR remote control
<Format> [PC,RC,RC code]<CR>
(For the RC code, refer to the PC RC command control parameters on page 7.)
<Reply> [PC,RC,Error code] (For the error codes, refer to the list of error codes on page 6.)
<Details> ・All IR remote control key operations can be controlled by serial remote.
・Send RC codes following the "List of PC RC command control parameters".
Example: To start playback
[PC,RC,44]<CR> → Code 44 (Play) is sent from the controller.
[PC,RC,0]
※ When in the power off standby mode, basically PS and PC group commands are not accepted.
The following three PC RC commands are accepted, however.
[PC,RC,12]<CR> ( DVD POWER )
[PC,RC,44]<CR> ( PLAY )
[PC,RC,66]<CR> ( OPEN/CLOSE )
Play title or track command ( PlayT ) ----- Valid for DVDs, CDs, and VCD/SVCD （only when PBC off） discs
2.
<Format> [PC,PlayT,Title or Track No.]<CR>
<Reply> [PC,PlayT,Error code] (For the error codes, refer to the list of error codes on page 6.)
<Details> ・For DVDs and VCDs: In the stop, play and pause modes, playback of the assigned title starts.
・For CDs: In the stop, play and pause modes, playback of the assigned track starts. In
the pause mode, however, the player remains in the pause mode.
・If a title or track number that does not exist on the disc is specified, error code 2 is
returned and control is not accepted.
・For CD-R/RW discs containing MP3 files, JPEG files, etc., error code 10 is returned
and control is not accepted.
Example: To start playing title 1
[PC,PlayT,1]<CR> → The command to play title 1 is sent from the controller.
[PC,PlayT,0]
3. Play chapter command ( PlayC ) ---- Valid for DVDs discs
<Format> [PC,PlayC,Title No.,Chapter No.]<CR>
<Reply> [PC,PlayC,Error code] (For the error codes, refer to the list of error codes on page 6.)
<Details> ・In the stop, play and pause modes, the specified chapter of the assigned title's chapter starts playing.
・If a title or chapter that does not exist on the disc is specified, error code 2 is returned.
・If a disc other than a DVD is loaded, error code 10 is returned and control is not
accepted.
Example: To start playing title 1 chapter 5
[PC,PlayC,1,5]<CR> → The command to play title 1 chapter 5 is sent from the controller.
← Error code 0 (no error) is returned from the DN-V310 and playback starts.
← Error code 0 (no error) is returned from the DN-V310 and playback starts.
９