Denon DN-V310 Instructions Manual page 16

Serial control

Hide thumbs Also See for DN-V310:

Table of Contents

Description of PS Commands (continued)

16. Get current title and chapter number confirmation request ( GetC ) ---- Valid for DVDs discs

<Reply> [PS,GetC,Error code,Title No.,Chapter No.]

(For the error codes, refer to the list of error codes on page 6.)

<Details> ・In the play or pause mode, requests the current title number and chapter number.

・In response to the request, the DN-V310 returns the error code corresponding to the

sent command and the current title number and chapter number.

・If a disc other than a DVD is loaded, error code 10 is returned.

Example: To check the number of the title and chapter of the DVD currently playing on

[PS,GetC]<CR> → A request for the current title and chapter number is sent from the

[PS,GetC,0,3,1] ← The sent message's error code 0 (no error) and title number 3 and

the DN-V310

controller.

chapter number 1 are returned from the DN-V310.

１６

Table of Contents