Denon DN-V310 Instructions Manual page 11

Serial control

Hide thumbs Also See for DN-V310:

Table of Contents

Description of PC Commands (continued)

Set sub-picture stream command ( SetSPST ) ---- Valid for DVDs

<Format> [PC,SetSPST,Sub-picture stream No.]<CR>

<Reply> [PC,SetSPST,Error code] (For the error codes, refer to the list of error codes on page 6.)

<Details> ・In the play or pause mode on a DVD, sets the sub-picture stream selection.

・If a stream number that does not exist on the disc is specified, error code 2 is returned.

・If a disc other than a DVD is loaded, error code 10 is returned and control is not accepted.

・The set stream number is only valid within the currently playing title. If the title is

changed, the stream number is reset according to the navigation data of the newly

playing title. (If nothing is specified in the navigation data, the setting remains valid.)

・To turn the sub-picture off, set the stream number to "0".

Example: To set to sub-picture stream 1

[PC,SetSPST,1]<CR> → Sub-picture stream 1 is sent from the controller.

[PC,SetSPST,0]

SW on/off OSD setting command ( OSD ) ---- Valid when the power is on

<Reply> [PC,OSD,Error code] (For the error codes, refer to the list of error codes on page 6.)

<Details> ・Sets whether on or not to display the OSD and the icons that appear on the screen.

・When the OSD is turned off, "HIDE OSD LED" lights on the front panel.

・When the OSD is turned off, the setup and display operations, etc., are disabled.

Example: To turn the OSD off

[PC,OSD,OFF]<CR> → The command for turning the OSD off is sent from the controller.

[PC,OSD,0]

SW on/off local keyboard lock setting command ( LKC ) ---- Valid when the power is on

<Reply> [PC,LKC,Error code] (For the error codes, refer to the list of error codes on page 6.)

<Details> ・Sets whether to lock or unlock the front panel keys.

・When the lock is turned on, the "KEY LOCK" LED on the front panel lights.

・When the lock is turned on, operation of all of the keys on the front panel aside from

the AC switch is disabled.

Example: To turn the key lock mode on

[PC,LKC,ON]<CR> → The command for turning the key lock mode on is sent from the controller.

[PC,LKC,0]

← Error code 0 (no error) is returned from the DN-V310 and the setting is made.

１１

Table of Contents