Description Of Ps Commands - Denon DN-V310 Instructions Manual

4

Description of PS Commands

Ⅱ. External Control Status: PS group
Detailed description of the status confirmation commands
11. Get player status confirmation request ( GetStatus ) ---- Valid when the power is on
<Format> [PS,GetStatus]<CR>
<Reply> [PS,GetStatus,Error code,Status code]
(For the error codes, refer to the list of error codes on page 6.)
<Details> ・Sends a request for the DN-V310's operating status.
・In response to the request, the DN-V310 returns the error code corresponding to the
sent command and the status code indicating the DN-V310's status.
・During loading, the DN-V310 does not respond to the command, and the received command is
not valid. Send the command again after loading is completed or until there is a response.
List of status codes
Code
0
1
2
3
4
5
Example: To get the DN-V310's operating status
[PS,GetStatus]<CR> → A request for the DN-V310's operating status is sent from the controller.
[PS,GetStatus,0,4]
Name Description
Error Disc error or other problem has arisen
Opened Tray is open
No Disc Tray is closed by no disc is loaded
Stopped Stop mode condition
Playing Play mode condition
Pause Still or pause mode condition
← The sent message's error code 0 (no error) and status code 4
(Playing) are returned from the DN-V310.
１３