Es6138F Pin Description - Denon DVD-2910 Service Manual

ES6138F Pin Description

Name Pin Numbers
VEE 1,18, 27, 59, 68, 75,
92, 99, 104, 130,
148, 157, 159, 164,
183, 193, 201
2:7, 10:16, 19:23,
LA[21:0]
204:207
VSS 8, 17, 26, 34, 43,
60, 67, 76, 84, 91,
98, 103, 120, 129,
138, 147, 156, 163,
171, 177, 184, 192,
200, 208
9, 35, 44, 83, 121,
VCC
139, 172
RESET#
TDMDX
RSEL
TDMDR
TDMCLK
TDMFS
TDMTSC#
TWS
SEL_PLL2
I/O Definition
P I/O power supply.
O RISC port address bus.
G Ground.
P Core power supply.
24 I Reset input (active-low).
O TDM transmit data output.
I LCS3 ROM Boot Data Width Select. Strapped to VCC or ground via 4.7-kΩ
resistor; read only during reset.
25
28 I TDM receive data input.
29 I TDM clock input.
30 I TDM frame sync input.
31 O TDM output enable (active-low).
O Audio transmit frame sync output.
I System and DSCK output clock frequency selection is made at the rising edge of
RESET#. The matrix below lists the available clock frequencies and their
respective PLL bit settings. Strapped to VCC or ground via 4.7-kΩ resistor; read
only during reset.
SEL_PLL2
32
RSEL Selection
0 16-bit ROM
1 8-bit ROM
SEL_PLL1 SEL_PLL0
0 0
0 0
0 1
0 1
1 0
1 0
1 1
1 1
36
DVD-2910/955
PLL Settings
DCLK × 4.5
0
DCLK × 5.0
1
0 Bypass
DCLK × 4.0
1
DCLK × 4.25
0
DCLK × 4.75
1
DCLK × 5.5
0
DCLK × 6.0
1