Description Of Pr Commands - Denon DN-V310 Instructions Manual

5

Description of PR Commands

Ⅲ. Asynchronous Responses: PR group
Detailed description of the status change notification commands
17. End of title or track notification ( EOT ) ---- All discs
<Reply> [PR,EOT,Error code,Title or Track No.]
(For the error codes, refer to the list of error codes on page 6.)
<Details> ・If the currently playing title or track has ended due to the play or skip operations, etc.,
the change in status is notified.
・When the currently playing track has ended, the DN-V310 issues a message consisting
of this command, the operating status error code, and the number of the title or track
for which playback has ended.
Example: When playback of title 3 has ended
[PR,EOT,0,3] ← Operating status error code 0 (no error) and title number 3 which
18. Start of a chapter notification ( SOC ) ---- DVDs only
<Reply> [PR,SOC,Error code,Title No.,Chapter No.]
(For the error codes, refer to the list of error codes on page 6.)
<Details> ・If playback of a new chapter has started due to the play or skip operations, etc., the
change is status is notified.
・When playback of a chapter starts, the DN-V310 issues a message consisting of this
command, the operating status error code, and the number of the title and chapter
which has started playing.
Example: When playback of title 1, chapter 5 starts
[PR,SOC,0,1,5] ← Operating status error code 0 (no error) and the title number 1 and
19. End of a chapter notification ( EOC ) ---- DVDs only
<Reply> [PR,EOC,Error code,Title No.,Chapter No.]
(For the error codes, refer to the list of error codes on page 6.)
<Details> ・If the currently playing chapter has ended due to the play or skip operations, etc., the
change is status is notified.
・When the currently playing chapter has ended, the DN-V310 issues a message
consisting of this command, the operating status error code, and the number of the title
and chapter for which playback has ended.
Example: When playback of title 1, chapter 3 has ended
[PR,EOC,0,1,3] ← Operating status error code 0 (no error) and title number 1 and
※If the chapter and title end simultaneously, the EOC command is not issued. Only the EOT
command is issued.
has finished playing are sent from the DN-V310.
chapter number 5 which has started playing are sent from the
DN-V310.
chapter number 3 which has finished playing are sent from the
DN-V310.
１７