Denon DN-V310 Instructions Manual page 18

Description of PR Commands (continued)
20. Execution of a command and change status notification ( StatusChange ) ---- Valid when the power is on
<Reply> [PR,StatusChange,Error code,Status code]
(For the error codes, refer to the list of error codes on page 6.)
<Details> ・If the DN-V310's operating status has changed, for example by command execution,
front panel operation or the ending of a disc, the change is status is notified.
・When a change of operating status has occurred, the DN-V310 issues a message
consisting of this command, the operating status error code, and the status code.
List of status codes
Code
0
1
2
3
4
5
Example: If the DN-V310's operating status has changed from the stop to the play condition
[PR,StatusChange,0,4] ← Operating status error code 0 (no error) and play mode
Name Description
Error Disc error or other problem has arisen
Opened Tray is open
No Disc Tray is closed by no disc is loaded
Stopped Stop mode condition
Playing Play mode condition
Pause Still or pause mode condition
status code 4 are sent from the DN-V310.
１８