Denon DN-V310 Instructions Manual page 23

Appendix 2 Example of JPEG Pause Playback using the PC RC Commands (continued)
2. Using the SKIP key code
[PC,RC,48] (Pause)
[PC,RC,1] (Track 1 selected)
To switch to the track
5 picture next
① Current track no.
acquired.
[PS,GetT] (Track request)
② Calculate number of
tracks to be skipped:
Destination track -
Current track →5-1=+4
[PC,RC,48] (Pause)
[PC,RC,246] (SKIP+)
[PC,RC,48] (Pause)
[PC,RC,246] (SKIP+)
[PC,RC,48] (Pause)
[PC,RC,246] (SKIP+)
[PC,RC,48] (Pause)
[PC,RC,246] (SKIP+)
Controller
DN-V310
Power ON
[PR.StatusChange,0,4] (auto playback when power is turned on)
[PC.RC,0] (No Error)
[PR,StatusChange,0,5] (status changes to pause)
[PC.RC,0] (No Error)
[PS.GetT,1] (Track No. 1)
[PC.RC,0] (No Error)
[PC.RC,0] (No Error)
[PC.RC,0] (No Error)
[PC.RC,0] (No Error)
[PC.RC,0] (No Error)
[PC.RC,0] (No Error)
[PC.RC,0] (No Error)
[PC.RC,0] (No Error)
２３
↓
With this, the track 1
picture is displayed as a
still picture.
The screen switches to
track 5, which is displayed
as a still picture.