Appendix 2 Example Of Jpeg Pause Playback Using The Pc Rc Commands - Denon DN-V310 Instructions Manual

Appendix 2 Example of JPEG Pause Playback using the PC RC Commands

With the DN-V310, pause playback of still JPEG images using serial remote can be performed using
a sequence of PC RC commands.
In concrete terms, there are two ways of doing this: by using the digit 0 to 9 and +10 key codes, and
by using the SKIP key code. When using digits, the folder menu is displayed when switching. If you
do not want the folder menu to be displayed, choose the method using the SKIP key code instead.
Below are two examples of control.
Concrete examples 1 and 2 both suppose that auto play setting is on and that playback is started
when the power is turned on.
1. Using digit key codes
[PC,RC,48] (Pause)
[PC,RC,1] (Track 1 selected)
To switch to the track
5 picture next
[PC,RC,48] (Pause)
[PC,RC,1] (Track 5 selected)
Controller DN-V310
Power ON
[PR.StatusChange,0,4] (auto playback when power is turned on)
[PC.RC,0] (No Error)
[PR,StatusChange,0,5] (status changes to pause)
[PC.RC,0] (No Error)
[PC.RC,0] (No Error)
[PC.RC,0] (No Error)
２２
↓
With this, the track 1 picture is displayed
as a still picture.
The screen switches to track 5, which is
displayed as a still picture.