Denon DN-V310 Instructions Manual page 26

Serial control

Hide thumbs Also See for DN-V310:

Table of Contents

Appendix 4 Hyper Terminal Settings (continued)

6. Property settings

・ From the Hyper Terminal "File" menu, select "Properties".

・ Set the items on the window that appears next as shown on the diagram below.

7. ASCII settings

・ Click "ASCII setup", set the values on the window that appears as shown on the diagram below,

then click "OK". The window in 6 above reappears. Click "OK".

This completes the Hyper Terminal settings.

8. Checking the connection

・ When the DN-V310's tray opens, [PR,StatusChange,1] should appear on the Hyper Terminal

window.

・ When a CD-DA disc is loaded and [PC,PlayT,1] is sent, Track 1 should be played.

If the above operations work, this indicates that two-way communications are being performed normally.

２６

Table of Contents