Direct Voice Call; Do Not Disturb - Mitel MiVoice 5360 User Manual

MiVoice 5360 IP Phone User Guide
To end a Direct Page call, do one of the following:

Hang up the handset to end a handset call.

Press (SPEAKER) to end a Handsfree call.

Press (CANCEL).
When the Handsfree Direct Page call ends, the (MUTE) key light returns to the state it was in
before the call was established.

Direct Voice Call

Direct Voice Call feature allows you to establish a two-way handsfree call at another extension
whether or not it has Handsfree Answerback or Auto-Answer turned on. Only extensions
programmed by the system administrator to receive Direct Voice Calls can be called using this
feature.
To make a Direct Voice Call:
1. Lift handset.
2. Dial the appropriate feature access code.
3. Dial the extension you want.
4. Speak to called party.

Do Not Disturb

When you enable Do Not Disturb, callers will get a busy tone, and an on-screen text message
indicating that you do not wish to be disturbed.
To activate or deactivate Do Not Disturb:

Press the Do Not Disturb key that you programmed. The key indicator is lit when Do Not
Disturb is activated and is not lit when Do Not Disturb is not activated. The phone status line
shows the Do Not Disturb
To activate Do Not Disturb from a remote extension:
1. Lift handset.
2. Dial the number of the station to which Do Not Disturb is to apply.
3. Hang up.
52
icon.