User Pin - Mitel MiVoice 5360 User Manual

To activate Phone Lock:

Press the Phone Lock feature key or enter the Phone Lock Feature Access code.
To de-activate Phone Lock:

Press the Phone Lock feature key or enter the Phone Unlock Feature Access code.

Enter your user PIN to unlock the set.
Note: If a user PIN has not been assigned, enter # when prompted for the PIN to unlock the
phone.

User PIN

A Personal Identification Number (PIN) allows a user to log into a set as a hot desk user or
generic SIP user. It is also used to de-activate the Phone Lock feature. PINs must be from 0 to 8
digits in length. Only digits (0 to 9) are permitted. The default PIN is blank (length zero).
Users will have one generic PIN that can be used for any required features.
The User PIN initially has a zero length, allowing a user, for example, to unlock a phone using a
blank PIN for Phone Lock. Setting the User PIN on the set requires the PIN to have at least one
digit.
To change the User PIN:
1. Press SuperKey (must be programmed to a key)
2. Press No until "Set User PIN?" appears.
3. Press Yes softkey or the User PIN softkey.
4. At the prompt "Enter Old PIN", enter your old User PIN.
5. Press Enter.
6. At the prompt "Enter new PIN", enter your new PIN.
Use left arrow key to correct mistakes. The PIN can include digits from 0 to 9 only and can be
from 0 to 8 characters in length.
7. Press Enter.
8. At the prompt to verify the PIN, re-enter your new PIN again. The set confirms successful or
failed completion.
9. Press Superkey to end the Superkey session.
MiVoice 5360 IP Phone User Guide
67