Replacing A Headlight Bulb - Yamaha RST90G Owner's Manual

RST90
1. Grease nipple
RST90TF / RST90TFL / RST90TFY
1
1. Grease nipple
ESU14940

Replacing a headlight bulb

RST90
1. Open the shroud.
2. Disconnect the headlight coupler.
3. Remove the bulb holder cover.
1. Headlight coupler
2. Bulb holder cover
Periodic maintenance and adjustment
1
1
2
4. Unhook the bulb holder, and then re-
move the burnt-out bulb.
1. Bulb holder
5. Install a new bulb, and then hook the
bulb holder onto the headlight unit.
NOTICE: Keep oil and your hands
away from the glass part of the bulb or
its life and illumination will be affect-
ed. If the glass is oil stained, thorough-
ly clean it with a cloth moistened with
alcohol or lacquer thinner.
1
1. Do not touch the glass part of the bulb.
Bulb type:
Halogen bulb
6. Install the bulb holder cover, and then
connect the headlight coupler.
7. Close the shroud.
RST90TF / RST90TFL / RST90TFY
1. Remove the shroud and the top cover.
(See page 60 for removal procedures.)
[ECS00622]
93