Replacing A Headlight Bulb - Yamaha RS Venture RST90Y Owner's Manual

1. Throttle cable end
1. Lubrication point
1. Lubrication point
ESU12211

Replacing a headlight bulb

1. Open the shroud.
2. Disconnect the headlight coupler.
3. Remove the bulb holder cover.
Periodic maintenance and adjustment
1. Headlight coupler
2. Bulb holder cover
4. Unhook the bulb holder by pushing it in,
then upward.
1. Bulb holder
5. Remove the bulb.
6. Install the new bulb, and then hook the
bulb holder onto the headlight unit.
NOTICE: Keep oil and your hands
away from the glass part of the bulb or
its life and illumination will be affect-
ed. If the glass is oil stained, thor-
oughly clean it with a cloth moistened
with alcohol or lacquer thinner.
1
2
[ECS00621]
61