Periodic maintenance and adjustment
2.
Remove the headlight unit bolt and the
windshield stay bolts on each side of the
snowmobile.
2
1. Headlight unit bolt
2. Windshield stay bolt
3.
Unhook the headlight unit as shown,
then lift it up and move it forward, away
from the handlebar. NOTICE: Be careful
not to scratch the snowmobile when
moving the headlight unit.
1. Headlight unit
4.
Disconnect the headlight coupler.
5.
Remove the bulb holder cover.
94
1
6.
[ECS00921]
1
7.
1
2
1. Headlight coupler
2. Bulb holder cover
Unhook the bulb holder, and then re-
move the burnt-out bulb.
1
1. Bulb holder
Install a new bulb, and then hook the
bulb holder onto the headlight unit.
NOTICE: Keep oil and your hands
away from the glass part of the bulb or
its life and illumination will be affect-
ed. If the glass is oil stained, thorough-
ly clean it with a cloth moistened with
alcohol or lacquer thinner.
[ECS00622]