Yamaha RST90G Owner's Manual page 21

2. Push and hold down the "SELECT" but-
ton.
3. Turn the key to the on position, and then,
after 5 seconds, release the "SELECT"
button.
4. Push the "RESET" button to select the
desired display brightness level, and
then push the "SELECT" button. The dis-
play returns to the previous display
mode.
RST90
The multi-function meter unit is equipped
with the following:
 a digital speedometer
 a tachometer
 an odometer
 a tripmeter
 warning indicators
 a warning light
 a low coolant temperature indicator light
 a high beam indicator light
 a fuel meter
 a grip/thumb warmer level indicator
After the engine is started, the tachometer
needle makes one sweep, and the low cool-
ant temperature indicator light, the warning
light, and all segments of the meter unit dis-
play come on and go off.
Control functions
1 2 3 4
1. Tachometer
2. Low coolant temperature indicator
light " "
3. High beam indicator light "
4. Warning light "
5. Warning indicators
6. Meter display
7. Select/reset button
The grip warmer level is initially displayed for
5 seconds, then the display switches to the
fuel meter.
TIP
To switch the speedometer, odometer, and
tripmeter displays between kilometers and
miles, select the odometer mode "ODO", and
then push the select/reset button for at least
10 seconds while the snowmobile is stopped.
Odometer and tripmeter modes
1
1. Odometer/tripmeter
Odometer shows the total distance that the
vehicle has run.
5 6 7
"
"
15