Table of Contents
Advertisement
Control functions
3
1. Hole
2. Rear carrier
3. Bolt
4. Carrier lock bracket
5.
Slide the rear carrier backward until it
stops.
6.
Pull the carrier lock lever up to lock the
rear carrier in place. Then, place the lever
under the rear carrier and secure it with
the holder. NOTICE: When using the
rear storage area, do not load any car-
go that is too large for it. In addition,
cargo must not project from the edges
of the rear storage area.
1. Carrier lock lever
To install the passenger seat and backrest
1.
Remove the rear carrier. (Refer to steps
1–2 in the "To remove the passenger
seat and backrest" section.)
2.
Install the passenger seat, and then in-
stall the passenger seat lock knob.
34
3
4
1
2
[ECS00212]
3.
Align the holes in the backrest bracket
with the bolts on the carrier lock bracket,
and then place the backrest on the carri-
er lock bracket.
1
1. Hole
1. Bolt
4.
Align the holes in the rear carrier with the
bolts on the carrier lock bracket, and
then place the rear carrier on the carrier
lock bracket.
5.
Slide both the backrest and the rear car-
rier backward until they stop.
6.
Pull the carrier lock lever up to lock the
backrest and the rear carrier in place.
Then, place the lever under the rear car-
rier and secure it with the holder.
Advertisement
Table of Contents
