Lubrication; Replacing A Headlight Bulb - Yamaha VENTURE PZ5NXJ Owner's Manual

Periodic maintenance and adjustment
ECS00611
NOTICE
 Only use in deep snow riding conditions.
 Operation on areas with light snowfall,
ice, hard-packed snow, dirt, or grass will
result in rapid wear or damage to the
track and slide runners from lack of
snow which serves as a lubricant.
ESU12199

Lubrication

Lubricate the following points with the speci-
fied grease.
EWS00512
WARNING
Do not grease the throttle cable because it
could become frozen, which could cause
loss of control. Apply a dab of grease onto
the cable end only.
TIP
For parts equipped with a grease nipple, use
a grease gun.
Lubricants:
Brake lever:
Silicone grease
Other lubrication points:
Low-temperature grease
1. Lubrication point
68
1. Throttle cable end
PZ5NX
1. Grease nipple
PZ5NT
1. Grease nipple
1 ESU12243

Replacing a headlight bulb

1. Remove the top cover (PZ5NX) or open
the shroud (PZ5NT). (See page 44 for re-
moval procedures.)
2. Disconnect the headlight coupler.
3. Remove the bulb holder cover.
1
1