Yamaha RST90G Owner's Manual page 18

Table of Contents

Advertisement

Control functions
 a digital speedometer
 a tachometer
 an odometer
 two tripmeters
 a fuel reserve tripmeter
 an oil change tripmeter
 a clock
 a drive mode display
 warning indicators
 a warning light
 a low coolant temperature indicator light
 a high beam indicator light
 a fuel meter
 a grip/thumb warmer level indicator
 a display brightness control function
When the key is turned to the on position, the
tachometer needle makes one sweep, and
the low coolant temperature indicator light,
the warning light, and all segments of the me-
ter unit display come on and go off.
1
2 3
4
1. "MODE" button
2. "RESET" button
3. "SELECT" button
4. Tachometer
5. Warning indicators
6. Clock
7. Low coolant temperature indicator
light "
"
8. High beam indicator light "
9. Warning light "
10. Electric power steering warning indicator
"EPS"
11. Drive mode display
12. Meter display
12
5 6
"
"
The grip warmer level is initially displayed for
5 seconds, then the display switches to the
fuel meter.
TIP
To switch the speedometer, odometer, and
tripmeter displays between kilometers and
miles, select the odometer mode "ODO", and
then push the "SELECT" button for at least
10 seconds while the snowmobile is stopped.
Odometer and tripmeter modes
1. Odometer/tripmeter/fuel reserve tripmeter
7
Odometer shows the total distance that the
8
vehicle has run.
9
10
Tripmeter A and tripmeter B show the dis-
11
tance traveled since they last reset.
12
Fuel reserve tripmeter shows the distance
traveled since the fuel level warning indicator
and warning light came on.
Pushing the "SELECT" button switches the
display between the odometer mode "ODO"
and the tripmeter modes "TRIP A" and "TRIP
B" in the following order:
ODO → TRIP A → TRIP B → ODO
If the fuel level warning indicator and warning
light come on (see page 17), the odometer
display will automatically change to the fuel
reserve tripmeter mode "TRIP F" and start
counting the distance traveled from that
point. In that case, push the "SELECT" but-
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rst90tfgRst90tflgRst90tfyg

Table of Contents