Extreme Networks BlackDiamond 10808 Installation Manual page 68

3 Slide the carton up over the chassis, as shown in
Remove 4 bolts
holding chassis
4 Remove the four restraining bolts that secure the chassis to the pallet using an adjustable wrench.
Two bolts are at the front of the chassis, and connect to the pallet itself through holes in the vertical
side bars. The remaining two bolts are at the sides and backs of the pallet.
5 Follow the steps in "Standard Rack Installation" on page 69
page 70 depending on your installation requirements.
Squeeze prongs
to unlock
Clip lock
Lift box off
chassis
to pallet
Open
lock
Figure 27.
or "Mid-Mount Rack Installation" on
EX_087
EX_088
68