Extreme Networks BlackDiamond 10808 Installation Manual page 105

This chapter describes the BlackDiamond 8810 (formerly Aspen 8810) chassis, including:
BlackDiamond 8810 Chassis Architecture on page 105
Uncrating and Unpacking the BlackDiamond 8810 Chassis on page 108
Pre-Installation Requirements
Assembling the BlackDiamond 8810 Mid-Mount Kit
Rack Mounting the BlackDiamond 8810 Chassis
Re-crating and Re-packing the BlackDiamond 8810 Chassis on page 113
This section describes and shows the architecture of the BlackDiamond 8810 chassis:
BlackDiamond 8810 Chassis Front View on page 105
BlackDiamond 8810 Chassis Rear View on page 107
The BlackDiamond 8810 chassis consists of the following components:
One 10-slot chassis with backplane
Eight dedicated I/O module slots (labeled 1 through 4 and 7 through 10)
Two dual use I/O module/MSM slots (labeled 5/A and 6/B; at least one of the dual use slots must
contain an MSM)
Up to six power supplies (accessed from the front of the unit)
One fan tray (accessed from the front right of the unit)
One ESD-preventive wrist strap connector
When two MSMs are installed, the chassis can support up to 48 Gig per slot.
105