Extreme Networks BlackDiamond 10808 Installation Manual page 141
Extreme blackdiamond 10808: installation guide
Hide thumbs
Also See for BlackDiamond 10808:
- Hardware installation manual (144 pages) ,
- Hardware installation manual (424 pages) ,
- Installation manual (106 pages)
Advertisement
5 Locate the four captive screws on the PSU/fan controller located within the access panel as shown in
Figure
82.
6 Turn each captive screw counter-clockwise, using a #1 Phillips screwdriver, to loosen all four captive
screws on the PSU/fan controller also shown in
7 Gently pull the PSU/fan controller out from the access panel on the chassis.
Loosen Captive
Screws (x4)
Remove
PSU/Fan
Controller
Figure
82.
ASP033B
141
Advertisement
