Extreme Networks BlackDiamond 10808 Installation Manual page 124

Figure 65 shows the 10G4X module.
The 10G4X module has four unpopulated XENPAK-based 10 Gigabit Ethernet ports.
The default configuration of the 10G4X module is as follows. All ports:
Are added to the default VLAN as untagged.
Inherit the properties of the default VLAN (for example, protocol type and VLANid).
The 10G4X module has the following LEDs:
Module status
Module diagnostics
Port status
For information about the LEDs and their activity on the 10G6X module, see
page 127.
Module status LEDs
10 Gbs ports
ASP040
"I/O Module LEDs" on
124