Table of Contents
Advertisement
IPv6 Settings
The RCM101A can have its IPv6 address assigned dynamically at boot-up
(DHCP), or it can be given a fixed IP address.
For dynamic IP address assignment, select the Obtain IPv6 address
automatically [DHCP], radio button. (This is the default setting.)
To specify a fixed IP address, select the Set IPv6 address manually [Fixed
IP], radio button and fill in the IPv6 Address, Subnet Prefix Length and
Default Gateway.
Note: If the RCM101A is on a network that uses DHCP to assign network
addresses, and you need to ascertain its IP address, see IP Address
Determination, page 137, for information.
DNS Server
The RCM101A can either have its DNS server address assigned automatically,
or a fixed address can be specified.
For automatic DNS Server address assignment, select the Obtain DNS
server address automatically, radio button.
To specify a fixed address, select the Set DNS server address manually,
radio button and fill in the required information.
Note: Specifying an alternate DNS Server address is optional.
5. Web Configuration
43
Advertisement
Table of Contents
