Table of Contents
Advertisement
KVM over IP User Manual
IPv6
At present, the RCM Series of KVM Over IP Switch supports three IPv6
address protocols: Link Local IPv6 Address, IPv6 Stateless Autoconfiguration,
and Stateful Autoconfiguration (DHCPv6).
Link Local IPv6 Address
At power on, the RCM Series of KVM Over IP Switch is automatically
configured with a Link Local IPv6 Address (for example,
fe80::210:74ff:fe61:1ef). To find out what the Link Local IPv6 Address is, log
in with the RCM Series of KVM Over IP Switch's IPv4 address and open the
Device Management
the General list box (see page 160).
Once you have determined what the IPv6 address is, you can use it when
logging in from a browser or the Win and Java Client AP programs.
For example:
If you are logging in from a browser, you would key in
http://[fe80::2001:74ff:fe6e:59%5]
for the URL bar.
If you are logging in with the AP program, you would key:
fe80::2001:74ff:fe6e:59%5
for the IP field of the Server panel (see Windows Client AP Login, page 41).
Note: 1. To log in with the Link Local IPv6 Address, the client computer must
be on the same local network segment as the RCM Series of KVM
Over IP Switch
2. The %5 is the %interface used by the client computer. To see your
client computer's IPv6 address: from the command line issue the
following command: ipconfig /all. The % value appears at the
end of the IPv6 address.
268
→
Device Information page. The address is displayed in
Advertisement
Table of Contents
