Table of Contents
Advertisement
RCM101A User Manual
it hasn't obtained the address after one minute, it automatically
reverts to its factory default IP address (192.168.0.60).
2. If the RCM101A is on a network that uses DHCP to assign network
addresses, and you need to ascertain its IP address, see IP Address
Determination, page 137, for information.
Disable Dev Authentication
Selecting Disable Dev Authentication will disable local login authentication on
the RCM101A. The switch can only be accessed using LDAP, LDAPS, MS
Active Directory, or RADIUS authentication. For more information, see
ANMS - Authentication, page 48.
Reset Default Values
Click Reset Default Values to use the default factory settings of the RCM101A.
Reset Certificate
Click Reset Certificate to use the Private Certificate settings of the RCM101A.
For more information, see Private Certificate, page 57.
Reboot
Click Reboot to power down and restart the RCM101A.
26
Advertisement
Table of Contents
