Advanced Settings; Device Information - ATEN RCM101A User Manual

Advanced Settings

This section provides 7 sub-menus: Device Information, Network, ANMS,
Security, Date/Time, and Customization, used to configure device settings for
the RCM101A.

Device Information

The Device Information page is the first of the Advanced Settings pages, and
provides information about the RCM101A's status.
An explanation of each of the fields is given in the table below:
Field
Device Name
MAC Address:
Firmware Version
IP Address
Subnet Mask
Gateway
IPv6 Address
IPv6 Subnet Prefix
Length
To make it easier to manage installations that have more than one
RCM101A, each one can be given a name. To assign a name for
the RCM101A, key in one of your choosing here (50 characters
max.), then click Save.
The RCM101A's MAC Address is displayed here.
Indicates the RCM101A's current firmware version level. New
versions of the RCM101A's firmware can be downloaded from our
website as they become available (see Upgrade Main Firmware,
page 35). You can reference this number to see if there are newer
versions available on the website.
Displays the RCM101A's Internet Protocol Version 4 (32 bit)
address.
Displays the RCM101A's Subnet Mask address.
Displays the RCM101A's Default Gateway address.
Displays the RCM101A's Internet Protocol Version 6 (128 bit)
address (Appears only when an IPv6 address is assigned).
Displays the prefix length of the IPv6 Subnet address (Appears
only when an IPv6 address is assigned).
5. Web Configuration
Explanation
39