Table of Contents
Advertisement
IPv6 Stateless Autoconfiguration
If the RCM101A's network environment contains a device (such as a router)
that supports the IPv6 Stateless Autoconfiguration function, the RCM101A
can obtain its prefix information from that device in order to generate its IPv6
address. For example, 2001::74ff:fe6e:59.
As above, the address is displayed at the bottom of the Basic Settings page.
Once you have determined what the IPv6 address is, you can use it when
logging in from a browser or the WinClient program.
For example:
If you are logging in from a browser, you would key in
http://[2001::74ff:fe6e:59]
for the URL bar.
If you are logging in with the AP program, you would key:
2001::74ff:fe6e:59
for the IP field of the Server panel.
Appendix
141
Advertisement
Table of Contents
