Table of Contents
Advertisement
RCM101A User Manual
Network
The Network page is used to specify the RCM101A's network environment.
IP Installer
The IP Installer is an external Windows-based utility for assigning IP
addresses.
Click one of the radio buttons to select Enabled, View Only, or Disable for the
IP Installer utility. See page 137 for IP Installer details.
Note: 1. If you select View Only, you will be able to see the RCM101A in the
IP Installer's Device List, but you will not be able to change the IP
address.
2. For security, we strongly recommend that you set this to View Only
or Disabled after using it.
40
Advertisement
Table of Contents
