Page 45
USB Type-A to USB Type-B Cable Master RCM Front View Master RCM Rear View USB Type-A to USB Type-B Cable Slave RCM Front View Slave RCM Rear View...
Page 46
USB Type-A to USB Type-B Cable Master RCM Front View Master RCM Rear View USB Type-A to USB Type-B Cable Slave RCM Front View Slave RCM Rear View...
Page 47
USB Type-A to USB Type-B Cable Master RCM Front View Master RCM Rear View USB Type-A to USB Type-B Cable Slave RCM Front View Slave RCM Rear View...
Page 70
For RCMVGA101 / RCMDP101U only, to set the relay terminal to normally closed (NC) or normally open (NO), type the corresponding command below, and press [Enter]: ...
Page 100
Click the drop-down menu to select the user created system Exit Macro you would like to use and click Save. See System Macros on page 107 for details on creating exit macros.
Page 103
If the Serial Console is enabled and a user has telnet access rights, then the “Open Telnet Client” button will appear on the Remote Console page. Click this button to launch the built in telnet client AP.
Page 105
A second or two after clicking the Viewer icon, the desktop of the remote server appears as a window on your PC. The type of viewer appearing depends on the preference settings and the type of browser you are using.