Table of Contents
Advertisement
RCM101A User Manual
4. Key in the email address (addresses) of where you want the SMTP reports
sent to in the To field.
Note: 1. If you are sending the report to more than one email address,
separate the addresses with a semicolon. The total cannot exceed
256 Bytes.
2. 1 Byte = 1 English alphanumeric character.
5. Select the report options you would like sent. Choices include: Report IP
Address, Report system reboot, Report user login and Report user logout.
Log Server
Important transactions that occur on the RCM101A, such as logins and internal
status messages, are kept in an automatically generated log file. See Chapter 7,
The Log Server, for details on setting up the log server.
Specify the MAC address of the computer that the Log Server runs on in
the MAC address field.
Specify the port used by the computer that the Log Server runs on to listen
for log details in the Service Port field. The valid port range is 1–65535.
The default port number is 9001.
Note: The port number must be different than the one used for the
Program port (see Program, page 41).
SNMP Server
To be notified of SNMP trap events, do the following:
46
Advertisement
Table of Contents
