Ipv6 Settings - ATEN CN8000A User Manual

CN8000A User Manual

IPv6 Settings

The CN8000A can have its IPv6 address assigned dynamically at boot-up
(DHCP), or it can be given a fixed IP address.
For dynamic IP address assignment, select the Obtain IPv6 address
automatically [DHCP], radio button. (This is the default setting.)
To specify a fixed IP address, select the Set IPv6 address manually [Fixed
IP], radio button and fill in the IPv6 Address, Subnet Prefix Length and
Default Gateway.
Note: If the CN8000A is on a network that uses DHCP to assign network
addresses, and you need to ascertain its IP address, see IP Address
Determination, page 165, for information.
DNS Server
The CN8000A can either have its DNS server address assigned automatically,
or a fixed address can be specified.
For automatic DNS Server address assignment, select the Obtain DNS
server address automatically, radio button.
To specify a fixed address, select the Set DNS server address manually,
radio button and fill in the required information.
Note: Specifying an alternate DNS Server address is optional.
46