Advertisement
KEY OPERATOR PROGRAMS
4
Downloaded from:
http://www.usersmanualguide.com/
Code No. Program Name
P28
Initial Status
Setting
P29
Total Copy Count
P42
Right/Left Shift
Direction Selection
P43
Erase Mode
Selection
P44
Restrict Storage
of Inserts in Job
Program Memory
P45
Message Time
Setting
P46
Disable Operation
P70
Disabling of Auto
Paper Selection
P71
Disabling of Auto
Tray Switching
P72
Bypass-Tray
Prohibited in
Duplex Copy
P73
Disabling of Job
Program Changing
P74
Disabling of
Document Feeder
P75
Disabling of Duplex Temporarily prevents the duplex system from ope-
Copying
P76
Disabling of
Stapler
P77
Disabling of
Covers and Inserts
P78
Restricted Access
to Paper Trays
P90
Display the List of
All P Codes
P92
P Code List
Printout
I
I
Function
Sets the copier's initial settings in the ready condi-
tion.
Recalls the total copy counts of the copier, RADF,
duplex module, and staple sorter.
Determines whether shift direction change is to be
allowed.
Sets the initial mode for erase function.
Prevents insert pages from being stored in job
memory.
Sets the length of time that messages are dis-
played.
Prevents the copier from being started by people
other than key operator.
Prevents automatic paper selection.
Prevents automatic switching between the paper
trays.
Prohibits the use of the bypass tray during duplex
copying.
Prevents stored programs from being altered.
Prevents the use of the RADF when it malfunc-
tions.
rating when it malfunctions. Allows the use of the
copier but not the duplex system.
Prevents damage to the stapler while awaiting re-
pair service.
Prevents the selection of COVERS and INSERTS
mode.
Provides access to paper trays only for adding
paper or during misfeed removal.
Sequentially displays all available programs.
Sequentially prints all available programs.
Page No.
17
17
18
18
18
18
19
19
19
19
20
20
20
20
21
21
21
22
Advertisement
