Advertisement
KEY OPERATOR PROGRAMS
P92 P Code List Printout
Program P92 is used to print out the list of all programs.
For printing the data, an optional counter commander SF-EA13 is
needed. (See next page for instructions to print.)
When P92 is entered, the following message will appear.
22
Downloaded from:
http://www.usersmanualguide.com/
I
I
<P080>
P92: P CODE LIST PRINTOUT.
PUSH THE START/STOP KEY ON THE SF-EA13.
Press the START/STOP key of the counter commander.
The programs in which the setting has been changed from the
factory default setting are indicated with .
Advertisement
