Advertisement
P46 Disable Operation
Program P46 is used to prevent operation of the copier. It will remain
disabled until it is enabled by the key operator.
When P46 is entered, the following message will appear.
P70 Disabling of Auto Paper Selection
Program P70 is used to prevent automatic paper selection. When
disabled, the copier will not automatically select a paper tray contain-
ing paper that matches the size of the originals placed in the RADF.
When P70 is entered, the following message will appear.
P71 Disabling of Auto Tray Switching
Program P71 prevents automatic switching between the paper trays.
When P71 is entered, the following message will appear.
P72 Bypass-Tray Prohibited in Duplex Copy
Program P72 is used to disable the use of the bypass tray when
making the duplex copies.
When P72 is entered, the following message will appear.
Downloaded from:
http://www.usersmanualguide.com/
I
I
<P079>
P46: DISABLE OPERATION.
1.YES
Select either yes or no using the 10-key pad.
P70: DISABLING OF AUTO PAPER SELECTION.
<P059>
1.YES
Select either yes or no using the 10-key pad.
P71: DISABLING OF AUTO TRAY SWITCHING.
<P060>
1.YES
To disable auto tray switching, press key 1.
To restore auto tray switching, press key 2.
P72: BYPASS–TRAY PROHIBITED IN DUPLEX
<P061>
COPY.
1.YES
Press key 1 or 2 for selection.
KEY OPERATOR PROGRAMS
2.NO
2.NO
2.NO
2.NO
19
Advertisement
