Advertisement
P77 Disabling of Covers and Inserts
Program P77 is used to prevent the selection of COVERS and IN-
SERTS modes.
When P77 is entered, the following message will appear.
P78 Restricted Access to Paper Trays
Program P78 is used to prevent access to the paper trays except
when a tray is empty or needs to be opened for misfeed removal.
When P78 is entered, the following message will appear.
P90 Display the List of All P Codes
Program P90 is used to sequentially display all programs.
A
mark next to a program number indicates that the program is in use.
When P90 is entered, the following message will appear.
Downloaded from:
http://www.usersmanualguide.com/
I
I
<P067>
P77: DISABLING OF COVERS AND INSERTS.
1.YES
To disable the COVERS and INSERTS modes, press key 1.
To restore the modes, press key 2.
<P068>
P78: RESTRICTED ACCESS TO PAPER TRAYS.
1.YES
To prohibit access to the paper trays, press key 1.
To enable access to the paper trays, press key 2.
<P069>
P90: DISPLAY THE LIST OF ALL P CODES.
TO SCROLL DISPLAY : PRESS
RUN AN INDICATED PROGRAM : PRESS START.
P10:AUDITING MODE.
P11:COPIES BY ACCOUNT.
P12:BILLING BY ACCOUNT.
P13:BILLING CLEAR MODE.
P14:ACCOUNT NUMBER CONTROL.
1.
Press the SCROLL DISPLAY key to advance through
the list of programs.
Each additional press of the SCROLL DISPLAY key will ad-
vance the message display through the list of programs start-
ing with P10.
2.
To enter a program that is highlighted, press the
START key.
3.
Press the PROGRAM key to exit the program.
KEY OPERATOR PROGRAMS
2.NO
2.NO
KEY.
a a a a a
TO
21
Advertisement
