Advertisement
KEY OPERATOR PROGRAMS
P73 Disabling of Job Program Changing
Program P73 is used to prevent stored programs from being altered.
When P73 is entered, the following message will appear.
P74 Disabling of Document Feeder
Program P74 is used to prevent the use of the RADF when it malfunctions.
When P74 is entered, the following message will appear.
P75 Disabling of Duplex Copying
Program P75 is used to enable or disable the duplex system. If a
malfunction occurs within the duplex system of the copier, the sys-
tem can be disabled until it is serviced and operation is restored. The
rest of the copier in the meantime will remain operable.
When P75 is entered, the following message will appear.
P76 Disabling of Stapler
Program P76 is used to enable or disable the stapler of the optional
staple sorter. If the stapler malfunctions, it can be disabled to prevent
further malfunction or possible damage to the stapler until it can be
serviced.
When P76 is entered, the following message will appear.
20
Downloaded from:
http://www.usersmanualguide.com/
I
I
<P063>
P73: DISABLING OF JOB PROGRAM CHANGING.
1.YES
To prevent job programs stored in memory from being
erased or altered, press key 1.
To allow alteration, press key 2.
<P064A>
P74: DISABLING OF DOCUMENT FEEDER.
1.YES
To prohibit the use of the RADF, press key 1.
To enable the use of the RADF, press key 2.
<P065>
P75: DISABLING OF DUPLEX COPYING.
1.YES
To disable the duplex system, press key 1.
To enable the duplex system, press key 2.
<P066>
P76: DISABLING OF STAPLER.
1.YES
To disable the stapler, press key 1.
To enable the stapler, press key 2.
2.NO
2.NO
2.NO
2.NO
Advertisement
