Sharp SD-2060 Key Operator's Manual page 12

KEY OPERATOR PROGRAMS
10
Downloaded from: http://www.usersmanualguide.com/
I I
To change an account number
1. Press key 3.
The following message will appear.
<P026>
INPUT AN ACCOUNT NUMBER TO BE CHANGED.
ACCOUNT # –––––, PRESS START.
2. Enter the account number to be changed.
3. Press the START key.
The following message will appear.
<P027>
CHANGE
4. Enter the new account number.
5. Press the START key.
If a number that is already assigned is entered, the message
"THIS NUMBER IS ALREADY USED." will appear. Another
number must be chosen.
6. To change other account numbers, repeat steps 2 to 5.
Press the PROGRAM key to exit the program.
To print all assigned account numbers
1. Press key 4.
The following message will appear.
<P011>
PUSH THE START/STOP KEY ON THE SF-EA13.
2. Press the START/STOP key of the counter commander.
TO –––––, PRESS START.