Advertisement
P15 Price/Copy Setting
Program P15 is used to set the price per copy. Three price per copy
values can be set (#1, #2, and #3). As copies are made, the cumula-
tive cost of the copies is kept in memory.
When P15 is entered, the following message will appear.
Downloaded from:
http://www.usersmanualguide.com/
I
I
<P028>
P15: PRICE/COPY SETTING.
ENTER NEW UNIT PRICE AND PRESS START.
USE INTERRUPT KEY FOR DECIMAL POINT.
PRICE CODE
#1
#2
#3
1.
Enter the new price for price code #1 by using the 10-
key pad and then press the START key.
Use the INTERRUPT key for decimal points.
Similarly enter the prices for price codes #2 and #3.
If the START key is pressed without entering a value, the price
per copy will not be changed.
2.
When the entry for #3 is completed, the following
message will appear.
<P029>
PRICE CODE
#1
#2
#3
ACCOUNT NUMBER
-----
3.
To change the price code for an individual account
number, enter the account number, press the START
key, and enter the price code (#0, #1, #2, and #3).
To change all accounts to a single price code, enter the
price code only. (Skip account number entry by
pressing the START key.)
#0 means no price per copy will be set.
4.
Press the START key.
5.
Continue with steps 3 and 4 for other individual
accounts.
Press the PROGRAM key to exit the program.
KEY OPERATOR PROGRAMS
PRESENT PRICE
NEW PRICE
PRICE
-----
-----
-----
PRICE CODE
# -
------
------
------
11
Advertisement
