Advertisement
KEY OPERATOR PROGRAMS
P42 Right/Left Shift Direction Selection
This program is used to determine if shift direction change is to be
allowed when the CHANGE key is pressed.
When P42 is entered, the following message will appear.
P43 Erase Mode Selection
This program is used to set the initial mode for erase function.
When P43 is entered, the following message will appear.
P44 Restrict Storage of Inserts in Job Program Memory
Program P44 is used to prevent insert pages from being stored in job
memory.
When P44 is entered, the following message will appear.
P45 Message Time Setting
Program P45 is used to adjust the length of message display time.
When P45 is entered, the following message will appear.
18
Downloaded from:
http://www.usersmanualguide.com/
I
I
<P053>
P42: RIGHT/LEFT SHIFT DIRECTION
SELECTION.
1.YES
Select either yes or no using the 10-key pad.
<P054>
P43: ERASE MODE SELECTION.
1.EDGE
2.CENTER
Select the desired erase mode using the 10-key pad.
<P055>
P44: RESTRICT STORAGE OF INSERTS IN
JOB PROGRAM MEMORY.
1.YES
To disable storing insert pages, press key 1.
To enable storing insert pages, press key 2.
<P056>
P45: MESSAGE TIME SETTING.
SET THE TIME FOR MESSAGES.
(1 TO 12 SECONDS), PRESS START.
Set the time using the 10-key pad and press the START key.
2.NO
3.EDGE+CENTER
2.NO
––
Advertisement
