Advertisement
P17 Machine Identification Number
Program P17 is used to enter or print the machine number, which will
be printed with the machine auditing data using programs P11, P12,
P14, and P29.
For printing the data, an optional counter commander SF-EA13 is
needed. (See page 23 for instructions to print.)
When P17 is entered, the following message will appear.
P18 Account Number Security
Program P18 is used to prevent users from gaining access to ac-
counts by entering code numbers through trial and error. If P18 is
selected and an operator enters three successive invalid account
numbers, the copier will not accept another number for one minute
and the message "PLEASE SEE YOUR KEY OPERATOR FOR AS-
SISTANCE." will appear.
When P18 is entered, the following message will appear.
Downloaded from:
http://www.usersmanualguide.com/
I
I
To cancel all limits
1.
Press key 2.
2.
Press key 1.
<P077>
P17: MACHINE NUMBER CONTROL.
1.ENTER
To enter the machine number
1.
Press key 1.
The following message will appear.
<P078>
CHANGE
2.
Enter a new machine number and then press the
START key to update the machine number.
To print the machine number
1.
Press key 2.
The following message will appear.
<P011>
PUSH THE START/STOP KEY ON THE SF-EA13.
2.
Press the START/STOP key of the counter commander.
<P035>
P18: ACCOUNT NUMBER SECURITY.
MESSAGE REQUIRED WHEN 3 SUCCESSIVE
INPUT ERRORS ARE MADE FOR ACCOUNT?
1.YES
Select either yes or no using the 10-key pad.
KEY OPERATOR PROGRAMS
2.PRINT
TO –––––, PRESS START.
2.NO
13
Advertisement
