Using The Postscript Printer Driver With Windows; Windows Me, 98, And 95 Users - Epson EPL-N3000 Reference Manual

Using the PostScript Printer Driver with
Windows

Windows Me, 98, and 95 users

To print in the PostScript mode with Windows Me, 98, and 95,
you will have to install the PostScript printer driver. See the
appropriate sections below for installation instructions according
to the interface that you are using to print.
Note:
The USB interface is not available for printing under Windows 95.
Installing the PostScript printer driver for the parallel
interface
Follow these steps to install the PostScript printer driver for the
parallel interface:
1. Insert the printer software CD-ROM into your CD-ROM
drive.
2. Click Start, then Settings, and finally Printers.
3. Double-click the Add Printer icon.
4. The Add Printer Wizard will be displayed. Follow the
on-screen instructions until the screen asking you to select the
printer model is displayed.
5. Click Have Disk and specify the path to the appropriate INF
file necessary for installation. If your CD-ROM drive is D:, the
path will be D:\ADOBEPS\ENGLISH\WIN9X\PS_SETUP
(change the drive letter as needed for your system).
90
Using the PostScript Printer Software (Windows)