Interface Cards - Epson EPL-N3000 Reference Manual

Formatting the Hard Disk Drive
To format the Hard Disk Drive, follow the instructions below.
1. Make sure the printer is off and all interface cables are
disconnected.
2. Hold down the
3. When you see the message Support Mode on the LCD panel,
select HDD Format in the support menu.
Note:
After formatting the Hard Disk Drive, the printer will
automatically reboot.
When you want to erase only the fonts installed from the Adobe
PostScript 3 (PS3), follow steps 1 through 3 above. Select PS3 HDD
Init.
Other fonts installed from PS3 will also be erased.
When installing a Hard Disk Drive from other products, format it
with this function.

Interface Cards

Your printer comes with a Type B interface slot. Various optional
interface cards are available to expand your printer's interface
options.
Follow these steps to install an optional interface card.
Caution:
c
Before you install the interface card, be sure to discharge any
static electricity by touching a grounded piece of metal.
Otherwise, you may damage static-sensitive components.
button while you turn on the printer.
Installing Options
7
7
7
7
7
7
7
7
7
7
7
7
217