EPSON Quick Fuser Technology
The printer warms up faster than conventional printers. About 25
seconds are required from power ON to when printing can be
done at normal temperature. The time depends on the printer's
optional configuration. Furthermore, if printing data is received
in the sleep mode, printing will be started after a warm up time
of about 17 seconds.
Wide variety of fonts
The printer comes with a selection of 80 Laser-Jet-compatible
scalable fonts, and 3 bitmap fonts in LJ4 emulation mode to
provide you with the fonts you need to create
professional-looking documents.
Toner save mode
To reduce the amount of toner used in printing documents, you
can print rough drafts using the Toner Save mode.
Reserve Job function
The Reserve Job function let you store a print job on the printer's
Hard Disk Drive and reprint it directly from the printer's control
panel at any time without using your computer. You can also
print one copy in order to verify the content before printing
multiple copies. If the content of the print job is confidential, you
can set a password to limit access to it. For details, see "Using the
Reserve Job Function" on page 58.
Note:
You need an optional Hard Disk Drive installed in your printer in order
to use the Reserve Job function. For instructions on installing the Hard
Disk Drive, see "Hard Disk Drive" on page 210.
8
Getting to Know Your Printer