Selecting The Printer - Epson EPL-N3000 Reference Manual

6. When the following screen appears, click Install.
7. When installation is done, click Close.
This completes the installation of the PostScript 3 printer driver.
You now need to select the printer as described in the next section.

Selecting the Printer

The procedure for selecting the printer varies depending on the
protocol or interface used to connect the printer to your computer.
Note:
You cannot use FireWire for printer connection in the PostScript 3
mode. Although EPSON FireWire appears in the interface pop-up
list, it cannot be used with the PostScript 3 printer driver.
You need to make the settings for your installed options manually
when the printer is connected using USB, IP printing, or
Rendezvous. When the printer is connected using AppleTalk, the
printer software automatically makes the settings.
Using the PostScript Printer Software (Macintosh)
5
5
5
5
5
5
5
5
5
5
5
5
153