There may be no toner left in
the imaging cartridge.
The Density setting may be too
low.
Half-tone images print unevenly
Cause
Your paper may be moist or
damp.
There may be no toner left in
the imaging cartridge.
The gradation setting is too
small when printing graphics.
If the message on the LCD panel or in
EPSON Status Monitor 3 indicates that
the amount of toner left is low, see
"Replacing the imaging cartridge" on
page 224.
Increase the Density setting in the
Printing Menu on the control panel.
What to do
Do not store paper in a humid or damp
environment. Be sure to use paper that
is newly unwrapped or in the Extended
Settings on the printer driver. If the
printouts are still not what you
expected, try adjusting the Light/Dark
slider in the More Settings dialog box
accessed through the Basic Setting
menu.
If the message on the LCD panel or in
EPSON Status Monitor 3 indicates that
the amount of toner is low, see
"Replacing the imaging cartridge" on
page 224.
On the Basic Setting menu in the printer
driver, click More Settings, select the
Enh.MG button, then select Smooth.
Troubleshooting
9
9
9
9
9
9
9
9
9
9
9
9
267